Jack caught a view of Denali from his truck on a clear day, kind of a miracle!
Tag Archives: trucking
The Donjek River Bridge, Canada
Some memories are dictated much by the weather. Storms, wind, rain, and very often, sun. Sometimes the sun falls just right, and the breeze is peaceful, and you’re in a good place. It might so happen that it’s 40 below, but some things can’t be helped.
This is my single favorite photo of Jack. It is November 2006. His face is a little stiff from the cold but the afternoon setting sun shows how much he enjoys this crazy job of taking big things to faraway places.
In this case he gets to bring bridge beams to the Donjek River in Yukon Territory, Canada.
The old bridge is behind Jack.
Jack actually helped haul the bridge beams in the summer and is now (November 2006) back in the winter to pick them up again and bring them down to the crane on the ice.
There are two cranes used to pick up the bridge beam. The yellow piece that is at the right in the photo above is hanging from the other crane which is behind the person taking the photo (Jack).
The trucks are awaiting another bridge beam to load.
This is the dolly used to haul the bridge beams.
Jack is wearing a face mask, but no gloves! No figure.
The arrow is pointing to the bridge beams already placed where they will forever stay.
Below is a Google Earth image of the Donjek River. You can see the new bridge and the old road leading up to the river but the old bridge has been dismantled and removed.
Have a great day!
Probably the best trucking song of all time!
Photos from a past hauling job
Here are some miscellaneous photos that Jack took a couple of years back at a marine dock in Valdez. He was there in May of 2012, hauling items for the railroad bridge that’s now finished (although there aren’t tracks leading to or away from it).
The above piece is part of the hammer used to drive pilings into the ground. For bridge foundations in this case.
This is used to put pipe on so it can roll while being welded together.
These are miscellaneous items used on the bridge job.
Jack says this stands on end and the large circular piece drives down into the hole and onto a piling.
This is the hammer that pounds a piling, Jack thinks it’s for 24 inch pipe.
The large circular device in back should be for the large pipe in the far background.
24 inch pipe in back of some other items.
Sheet piling (which gets pounded into the ground to create an embankment) and miscellaneous steel items.
Six foot diameter pipe that most people can walk though without bending over.
More six foot diameter pipe with shipping containers in the background.
I must say this marine yard is a tad more attractive than most, surrounded by beautiful mountains and all!
Have a wonderful day and thanks to those of you who follow this blog and make comments. 🙂
+++++++++++++++++++++++++
+++++++++++++++++++++++++
+++++++++++++++++++++++++
Jack’s driving the motor home this time…
This year Jack took me and the motor home out for a quick weekend hunt. (It was really camping, not hunting, although Jack would have taken a shot if he came across one in an accessible area.) We really wish we had been able to get out a little more over the summer!
There is always next year…
Jack, taking a look
A Western Star truck driving the Dalton Highway with the Trans-Alaska Pipeline in the background. Jack knew who the driver was, of course.
Jack’s wife, Judy (me), and our dog Sport.
Any idea what these are?
Jack on a pipeline access road.
Finally the sun starts to come out!
And we get to see the pipeline in the evening sun.
The beautiful Dalton Highway road sign at 1 mile.
Jack taking a look at the big trucks, but he’s driving a motor home this time…
Here are a few more photos if you are interested.
Have a wonderful autumn everyone!
Atigun Pass, after an avalanche
Merry Christmas everyone!
The below two videos show Jack driving over Atigun Pass through an area of road the state has cleared a tunnel through after an avalanche.
http://www.youtube.com/watch?v=5MYzo645ffY
(You might have to click on the 2nd video if it doesn’t come up like the first one.)
___________________________________
___________________________________
Transportation Art by Christy Hollibone
We want to share this great artwork by Alaskan Christy Hollibone. You’ll see Jack on the far right and next to him are truckers Tony (left) and Phil (middle).
We especially like this one too:
To see more of her transportation art and excellent images of trucks, go to the Moments in Time Art Studio webpage.
Happy November to everyone!
_____________________
_____________________
Jack with his new truck!
How does Jack stay warm? Part 2
Another way Jack stays warm has to do with the generator in his truck that enables him to turn off the truck’s engine in the winter and not worry about the cab freezing or the engine not starting again. In fact, this generator is supposed to run at all times that the truck isn’t and keep the cab at room temperature or close to it. Unfortunately, reality is not quite that ideal. The generator sometimes breaks down and at those times Jack is forced to run the truck all night at any temperature below about 40 or 50 degrees (since even though Jack has an inner furnace, even he has a hard time sleeping when it’s below 50 degrees).
When I first learned that trucking companies run big trucks all the time during the winter, or at least used to before they got generators to keep the cab warm even when the truck was not running, I was shocked at the amount of fuel that must be needed on a daily basis throughout the winter. This is unfortunate, and it’s impressive that Carlile is one of the first trucking companies in Alaska to start using the generators in order to cut down on fuel use.
This 4KW generator runs on diesel which it draws from the truck’s fuel tank. It powers an electric heater under the bed in the cab and a fan blows heated air into the cab from there. On top of that, the generator serves another purpose: to circulate antifreeze through the truck’s engine in cold temperatures, preventing it from getting too cold to start. It’s a great deal and all big rigs driven up here should have them to cut down on fuel usage.
How does Jack stay warm out there? Part 1
You know how some people just have an inner furnace that keeps them warm all the time? That’s Jack. At 40 or 50 below he’ll bundle up with Carhartt bibs, and a hat, or maybe a face mask. But 20 below, that’s just normal to him.
A reader, John Webb, asked “I was just wondering when Jack is out on the Dalton swapping cogs how does he keep warm at night sleeping in his truck and why does’nt he ever wear a serious coat/jacket/parka, I feel cold just watching him get out when he’s hitchin up to his next load.”
Jack might have an inner furnace, but even he can misgauge temperatures when wind is a factor. A few years ago at 20 above, Jack frostbit his ear. This was a serious miscalculation on his part, and it shows what even a minor breeze can result in when it’s still above zero. (You can see the blister on the outer part but if you notice, almost half of the ear is red and swollen.)
So this is serious stuff to miscalculate on and Jack paid the price this time.
He does wear a serious jacket at those colder temperatures but oftentimes if it’s just a quick jump outside to check the load before leaving, his long-sleeved shirt (over a T-shirt) is enough. You balance the hassle of getting out your coat, which could be buried in the back under your cooler or lunch or logbook, with how much cold you can handle on your short trip out into it.
As for how he stays warm at night in the truck, stay tuned!
__________________________________________



































